The World's First Multi-Sets Solution

PLUG-AND-PLAY AC-COUPED ENERGY STORAGE SOLUTION

DAYTIME
NIGHTTIME
OFF-GRID MODE

During the day, Hyper 2000 delivers the electricity generated by the solar panels to the home, storing excess energy in the battery, thereby reducing energy waste.

At night, Hyper 2000 converts stored energy into AC power for the home, greatly improving the efficiency of your energy usage.
When your solar system isn't producing enough energy to power the home, Hyper 2000 can also charge the batteries from the grid, making it a flexible system that adapts to a wide range of scenarios.

At night, Hyper 2000 converts stored energy into AC power for the home, greatly improving the efficiency of your energy usage.
In emergencies and severe weather conditions, Hyper 2000's off-grid mode provides backup power for essential household appliances.

Save up to €876 per year on energy

6kWh

Daily Energy Savings

876€

Annual Savings

3.25 years

Payback Period

876€

/ Year

SolarFlow Hyper plug-in solar storage system (2,000W solar panels and 2*AB2000)

292€

/ Year

1,500W Plug-in solar system only

*A Plug-in solar system with 2000W solar panels and 1200 W microinverter generates up to 6 kWh per day and thus savings of up to 876€ per year are possible. (Combination Hyper 2000 + AB2000*2, 0.4€/kWh).
Source: ertragsdatenbank.de; bundesregierung.de

1200W Bidirectional AC Power

Bidirectional 1200W power can be used not just to power your home but also to store electricity from the grid. Our intelligent anti-discharge technology ensures that when sunlight has been scarce and batteries are running low, SolarFlow Hyper automatically taps into grid power to maintain a reserve charge. By drawing power from the grid during low-price periods and utilizing that stored energy when prices soar, you can significantly reduce your energy costs while maintaining a reliable power supply.

Intelligent Anti-Thermal-Runaway Tech

The intelligent anti-thermal-runaway technplogy ensures that the battery maintains a safe and reasonable temperature during charging and discharging. This feature helps to prevent battery overheating damage, ensuring your device's longevity and performance.

Automatic networking through ZenLink technology

Through ZenLink technology, Hyper 2000 can identify whether it shares the same phase with another unit. Hypers installed on the same phase automatically network, unifying their total power output (0-1800W). When on different phases, each Hyper works independently, capable of reaching its full 1200W capacity. This intelligent phase recognition ensures optimal power distribution and utilization across your electrical system.

Innovatively designed hybrid inverter

Hyper's innovative hybrid microinverter simplifies installations with its minimalist, plug-and-play design, perfect for homeowners adopting clean energy effortlessly.

Plug & Play, Installation Free

Experience hassle-free setup without complex installation procedures. Our plug-and-play system enables immediate operation right out of the box for exceptional convenience and time-saving benefits.

3rd Generation GaN Tech

Featuring advanced 3rd generation GaN technology, Hyper delivers higher efficiency than standard hybrid inverters.

Highly Efficient Energy Conversion

More efficient energy conversion than traditional plug-in solar storage systems: Instead of having solar energy go to the battery first and then to the microinverter, SolarFlow Hyper 2000 can convert PV power to AC for the home, making more efficient use of the energy you generate.

2400W Solar Power, 4 Sets of Solar Connectors

With 2400W solar power and an 1800W MPPT, Hyper delivers higher solar energy generation. Its four sets of solar connectors make installation easier and more convenient, while reducing energy loss compared to parallel connections.

Truly Zero Waste

Save your power all the time. Hyper 2000 pairs with Shelly Pro 3EM through local communication, without relying on the internet. Keep stable and instant, nothing interrupts your savings.

Time-of-Use Automation

Zendure app offers real-time electricity price notifications. Users can set a target price and plan a charging and discharging schedule accordingly. The system will automatically charge at low electricity prices and discharge at high prices, ensuring cost-effective utilization via time-of-use.

10-Year Warranty, 15-Year Product Lifetime

Hyper 2000 is engineered for exceptional power and durability to ensure that you can rely on SolarFlow for 15 years, with a 10-year warranty and professional customer support for peace of mind.

Multiple Options for Savings

Due to its higher voltage and lower current, the 48V platform reduces energy loss by 25% compared to the 16V platform. It provides stable high-power output, is more compact, and allows for flexible expansion, resulting in savings on electricity costs.

Applicable to various scenarios

Balcony
Workshop
Garden

Hyper 2000 is designed to IP65 standards and can be used in most outdoor environments.

Hyper 2000 features dual MPPTs, which are better suited to most installation conditions and can also increase the efficiency of your power generation.

Hyper 2000's space-saving modular design allows you to configure an energy storage system to your specific needs.

Installation Guide

Experience hassle-free setup without complex installation procedures.
Our Plug and Play modular design enables immediate operation right out of the box for exceptional convenience and time-saving benefits.

FAQ

What are the weight and dimensions of Hyper 2000?

Dimensions (L×W×H): 350 x 202 x 78mm,

Weight (excluding accessories): approximately 8.5kg

Can I buy a Hyper 2000 in Germany without paying VAT?

Yes. According to Section 12 of the German Value Added Tax Act (UStG), you do not need to pay VAT when purchasing Hyper 2000.

For a better shopping experience, we recommend visiting our German websiteto enjoy tax-free prices on your orders.

Can the Hyper 2000 be directly plugged into a household outlet, and which regions does it meet grid-connection requirements for?

Yes, the Hyper 2000 has obtained CERTIFICATION of VDE-AR-N 4105 (Germany) and CERTIFICATION of VFR 2019 (France), allowing it to be plugged directly into standard household sockets.

How can SolarFlow Hyper 2000 help me save money on my electricity bills?

Hyper 2000's 1800W MPPT and 1200W AC bidirectional inverter capabilities, in conjunction with intelligent power management features, can help you reduce costs in two ways:
During the day, Hyper converts the energy generated by the solar panels into AC power for the home, and the excess energy (which you can configure in the Zendure app or by using a compatible smart energy meter) will be used to charge the battery. At night, Hyper 2000 will convert the power stored in the battery into AC for home use. This reduces the waste of surplus solar power, helping you get the greatest cost benefit out of your system.
Additionally, using time-of-use (TOU) energy scheduling, a Hyper 2000 system cuts electricity costs by charging the battery when prices are low and using the battery's energy when prices are high.

How many solar panels can be connected to Hyper 2000?

Hyper 2000 has 4 sets of solar connectors and can connect with up to 4 groups of solar panels.

How do I choose the right solar panels for Hyper 2000?

1. We recommended that the maximum power range for each MPPT input be between 350W and 600W.
2. Please note that the Voc (open circuit voltage) on each MPPT input must be lower than 55V.

Does Hyper 2000 work with other brands of solar panels?

Yes. The recommended power range for each MPPT input is 350W-600W. with a voltage range of 15V-55V. Please be aware that solar panels with voltages above 55V may cause permanent damage to Hyper 2000.

Which battery models does Hyper 2000 support? What are their differences?

Hyper 2000 works with Zendure's AB2000 and AB2000S batteries. Both AB2000 and AB2000S has a capacity of 1920Wh. And both the AB2000 and AB2000S batteries can operate in temperatures as low as -20°C.

What is the maximum battery capacity for a Hyper 2000 system?

AB2000S and AB2000 can be freely combined in a stack of four batteries, with a maximum total capacity of 7680Wh.

Can Hyper 2000 charge the batteries using the household power grid?

Yes, Hyper 2000 can charge your batteries using your home's AC power. It can be scheduled to do so during off-peak hours to reduce costs, and will also atomatically charge from AC power when the batteries are low and there is insufficient solar power, preventing battery damage and ensuring that you have some reserve energy available.

Does Hyper 2000 have any special battery management technology?

Yes, Hyper 2000 is equipped with intelligent anti-discharge technology.
For the longevity and performance of your batteries, Hyper 2000 takes particular measures when the batteries are almost depleted. Hyper 2000 will use AC and/or solar power to keep the batteries at 5%. If AC and solar power are not available, Hyper 2000 will go into sleep mode to reduce discharge.

What is ZenLink technology? What are the benefits?

ZenLink is a local communication technology that offers key benefits over alternatives.
1. As soon as multiple Hyper 2000s are plugged into the home power grid, they instantly recognize each other and begin communicating, establishing a stable and reliable connection without relying on Wi-Fi.
2. Phase recognition: With this technology, it is unnecessary for an electrician to distinguish whether multiple Hyper devices are on the same phase. If they are on the same phase, they can automatically cluster and be controlled uniformly, saving a great deal of time and cost.

How does Hyper 2000 allocate power to the battery and my home?

You can adjust the AC output power in the Zendure App.
- When the solar panel generation is higher than the AC output power you set, Hyper 2000 will store the excess in the battery.
- When the solar panel generation is lower than the AC output power you set, all of the solar panel generation will be delivered to your home, and the battery will be discharged to meet the designated AC output power.
- At night, when there is no solar panel generation, Hyper 2000 will use the battery to power your home.

How do I get Hyper 2000 to automatically adjust output power?

AC Output power can be automatically adjusted using compatible smart plugs and smart enery meters. Hyper 2000 supports Shelly Pro 3EM, Shelly 3EM, Zendure Satellite Monitor CT, Zendure Satellite Plug, and Shelly Plus Plug S.

Is it normal for the device to heat up after being used for a while?

Yes, a slight increase in temperature during use is normal. This will not affect the device's lifespan. Hyper 2000 has undergone rigorous testing and is equipped with anti-overheating protection to ensure the safety of your system. Children and pets should not be allowed to touch Hyper 2000 while it is in operation.

Will Hyper 2000 supply power to the household during a power outage?

For safety reasons, Hyper 2000 will stop supplying power to the household when a power outage occurs. We are soon to launch a unique backup power strip that integrates with Hyper 2000 to provide electricity in an emergency.

I have a solar panel whose power is below the recommended 350-600W. Will it still work with Hyper 2000?

Yes, if the power of each of your solar panels is small (100W-350W), you can connect 2-3 panels in parallel on a single set of Hyper 2000's solar connectors. Please make sure that the open circuit voltage (Voc) of each solar panel is between 15-55V and multiple panels are in parallel.

What types of communication protocols can Hyper 2000 work with?

Hyper 2000 supports three types of communication protocols for reliability and convenience:
1. Wi-Fi 2.4GHz & 5GH: You can choose the most stable band to connect Hyper 2000 to the internet.
2. Bluetooth local communication; when there is no Wi-Fi signal, you can still control and monitor Hyper 2000 with the Zendure app if you are within Bluetooth range.
3. ZenLink: Multiple Hyper 2000 stacks will automatically recognize and coordinate with each other when they are connected to your home's outlets, without relying on Wi-Fi.

When does the Hyper 2000 automatically switch to charging mode in Smart CT mode to store surplus solar energy?

The Hyper 2000 automatically switches to charging mode when it detects that the energy produced by the solar system exceeds 80W and this condition lasts for one minute. The extra energy is then stored, with a 50W safety buffer to prevent any energy waste during the charging process. This ensures efficient use of excess energy while minimizing losses.

Note: This feature requires Hyper 2000 Master V2.1.18 or higher. If your device doesn't support it, please update the firmware.

Package